Grundig MC 5040 Bedienungsanleitung Seite 26

OPERATION ___________________________
Beard trimming
1
Adjust the trimming length by
referring to the "Preparation"
section.
2
Press the On/Off switch
switch on the appliance.
– The appliance starts.
3
Place the cutting head
beard.
4
Move the cutting head
the direction of hair growth. Apply
only a slight pressure when cutting
with slow, gentle movements.
5 After use, switch off the appliance
with the On/Off switch
26 ENGLISH
Notes
7
to
E
on the
A
7
against
A
.
E
If the appliance is blocked by
thick hair while you are using
it, switch it off. If running it from
the mains, unplug the socket.
Remove the adjustable comb
and clean the cutting head with
the brush supplied. Clean the
appliance as described in the
"Cleaning and Care" section.
For trimming contours, remove
the adjustable comb 1
adjustable comb 2
appliance without the combs
(cutting length is 1.5 mm).
or
B
. Use the
H