Braun BN0095 Gebrauchsanweisung Seite 5

Description of the display and control buttons
CALIBER NO: 5030.D Ronda
Small
second hand
Minute hand
Hour hand
Chronograph
second hand
Minute counter
Hour counter
Date
Setting the time
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position,
small second hand begins to run.
Setting the date
1. Pull the crown out to the 1st position.
2. Turn the crown clockwise to set the date.
3. After the date has been set, push the crown back to
the normal position.
Note: If the date is set between the hours of around
9:00 PM and 1:00 AM, the date may not change on the
following day.
Measuring time with the chronograph
1. The chronograph can be started and stopped each
time the push button A is pressed.
2. Pressing push button B resets the chronograph and
the chronograph second hand and the chronograph
minute hand return to zero position.
Push button A
Normal
crown position
1st crown position
2nd crown position
Push button B
5