Installation - Olsberg 14/713-3 Anleitung

•
Rating label, manufacturing (batch) number
The rating label (fig.3) contains all the data specific
to the heater model. The rating label is found on
the bottom right of the heater rear panel.
The manufacturing, or batch number is on a sepa-
rate label on the right hand side of the heater plinth
(remove front panel).
The model and batch numbers are important for
repair and spare parts purposes.
weight
fig.3

Installation

•
Turn the heater in its packaging upside down and
open the carton where indicated.
Remove the Styrofoam sheet.
Remove the heater feet (and their fixing materials)
from the packaging.
fig.4
18
model
•
Pull away the transparent cover sheet.
Fix the feet firmly to the underside of the heater us-
ing the materials provided (4 screws M6x12,
washers and lock-washers). Make certain that the
closed side of the feet face the wall!
Remove the Styrofoam corners from the packag-
ing.
fig.5
•
Remove the heater from the packaging using the
feet and lay it onto a soft surface (the Styrofoam
sheet can be used if necessary).
fig.6