Functional Description - Bosch IXO Bedienungsanleitung

When the battery is defective, liquid can
escape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Battery Charger
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
Do not charge other batteries. The battery
charger is suitable only for charging Bosch lithium
ion batteries within the listed voltage range. Other-
wise there is danger of fire and explosion.
Keep the battery charger clean. Contamination
can lead to danger of an electric shock.
Before each use, check the battery charger,
cable and plug. If damage is detected, do not
use the battery charger. Never open the bat-
tery charger yourself. Have repairs performed
only by a qualified technician and only using
original spare parts. Damaged battery chargers,
cables and plugs increase the risk of an electric
shock.
Do not operate the battery charger on easily
inflammable surfaces (e. g., paper, textiles,
etc.) or surroundings. The heating of the battery
charger during the charging process can pose a fire
hazard.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
Intended Use
The machine is intended for driving in and loosening
screws.
2 609 002 415 • 14.5.07
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Screwdriver bit*
2 Tool holder
3 Rubber cap
4 Indicator for right rotation
5 Battery charge-control indicator
6 Indicator for left rotation
7 Soft grip
8 On/Off switch
9 Rotational direction switch
10 "Power Light"
11 Battery charger
12 Torque attachment*
13 Torque presetting ring*
14 Torque-setting mark*
15 Angle driver head*
16 Release ring*
*The accessories illustrated or described are not
included as standard delivery.
Technical Data
Cordless Screwdriver
Article number
Rated voltage
No-load speed
Max. torque for hard/soft screw-
driving application according to
ISO 5393
Max. screw dia.
Weight according to
EPTA-Procedure 01/2003
Battery
Capacity
Battery Charger
Article number
Charging time
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
IXO
3 603 J59 1..
V= 3.6
rpm 180
Nm 3/2
mm 5
kg 0.3
Li-Ion
Ah 1.3
2 607 225 0..
h 5
English | 15