Answer Machine Settings; Memory Full - Swissvoice Aeris 126 Bedienungsanleitung

Aeris 126/126T

Answer machine settings

• Press , select
SETTINGS
• Select
• Select the desired function by pressing the navigation keys
ANS MODE
-
LANGUAGE
-
OGM SET
- - Play and record outgoing messages
ANS DLAY - Select 2, 4, 6, 8 rings or TS (Time saver mode)
-
REC TIME
- - Set the maximum length for incoming messages
COMPRESS
-
recording quality)
SCREEN
- - When set to on (default setting), incoming messages are played
back over the base station
REMOTE
- - Switch remote access on or off
CHG PIN
- - Change remote access PIN code (see below)
If you set the answer delay to Time Saver, your answer machine will
answer after 2 rings if you have new messages. If you do not have new
messages it will not answer until 6 rings. This enables you to save costs by
hanging up before you are connected.

Memory full

The recording capacity of your answer machine is 15 minutes (including outgoing
messages).
If the memory is full,
the base station display. No more messages can be recorded. The answer machine
switches to Answer only mode automatically. You must delete old messages.
108
TAM
and press
and press
- Answer&Record or Answer only mode
- Select the language for standard outgoing messages
- Set the desired recording quality (low compression=high
TAM FULL
appears on the handset display and
.
.
†/π
and press
F
flashes on
.