Inhaltsverzeichnis
Werbung
C-120i_C-120Ci_403691_18L_082508.indd Sec1:4-Sec2:3
C-120i_C-120Ci_403691_18L_082508.indd Sec1:4-Sec2:3
JAM PROOF SYSTEM OPERATION*
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
Advanced Jam Prevention- Electronically
1
measures paper thickness to prevent paper jams:
Up to RED: Too Many
sheets have been inserted.
Up to YELLOW: Productivity
is optimized.
Up to GREEN: More sheets
can be added.
If a misfeed
All indicators light up and
occurs:
shredder pauses for 3-6 seconds
*100% Jam Proof when used in accordance with user manual
SLEEP MODE
WHEN IN SLEEP MODE
2
3
1
AUTO
In sleep mode
To get out of sleep mode
or
insert paper
touch control panel
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
• For peak performance, we recommend oiling shredder each time waste bin is emptied. Only use a non-aerosol vegetable oil.
Machines not oiled may lose sheet capacity, become noisy, and ultimately, stop running.
• Though paper detection sensors are designed to be maintenance free, the sensors occasionally become blocked by paper dust, causing the motor to run even
if there is no paper present. Both sensors are located in the center of the paper entry.
• Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds.
• Empty wastebasket when bin full indicator lights up.
• Shredder won't run if the door is open, or bin needs to be emptied.
• Maintenance is an important part of protecting your investment. Don't forget our oil (35250) and shredder bags (36054).
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to the
problem, this model will require 45 minutes to cool down.
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
2
3
Continue 100% Jam
indicator is below red.
Proof Shredding
If
illuminates after paper has been
p p p p
Wait for flashing to stop after automatic correction
reversed, press reverse and remove paper.
, p
, p
p p
is complete. Regular shredding will resume.
Otherwise, regular shredding will resume.
SAFESENSE
®
TECHNOLOGY OPERATION
SET-UP AND TESTING
1
2
3
AUTO
Turn the shredder ON
Touch test area and
SafeSense
is active and
®
®
( ) to activate SafeSense
look for the SafeSense
working properly
®
®
indicator to illuminate
3
8/26/08 11:07:14 AM
8/26/08 11:07:14 AM
Werbung
Inhaltsverzeichnis
