P) "Sleep" Mode - Renkforce CR-1035 Bedienungsanleitung

"SYSTEM SETTING"
This function is only intended for the manufacturer to update the firmware of the clock radio.
"WALLPAPER"
After selecting "WALLPAPER" using the control wheel (2), press the "SNOOZE" button (3).
Now you can select one of the available wallpapers. The wallpaper is used e.g. with the file
manager or the music/video player.
"LANGUAGE"
After selecting "LANGUAGE" using the control wheel (2), press the "SNOOZE" button (3). Now
you can select the desired menu language.
"SYSTEM INFORMATION"
After selecting "SYSTEM INFORMATION" using the control wheel (2), press the "SNOOZE"
button (3). System information is displayed such as total memory and used memory (internal
or SD card) as well as the hardware version.

p) "SLEEP" mode

The clock radio is equipped with an integrated timer which can switch off the clock radio after
a specified time (15, 30, 60, 90, or 120 minutes).
Switch on the FM radio or play an audio file and press the "" button (1) until you are back
in the main menu.
Now press the "CLOCK" button to display the time and press the "SLEEP" button until the
desired time (15, 30, 60, 90, or 120 minutes) is displayed in the bottom right hand corner.
After the set time has elapsed, the FM radio or the audio file will automatically stop.
74
Operating manual

English