Renkforce CR-1035 Bedienungsanleitung Seite 64

"USER EQ SETUP" (manual equalizer settings)
Select the frequency band by pressing the "   " button (4) or the "    " button (5). Move
the slide switch by turning the control wheel (2).
To save the settings, press the "   " button (4) or the "    " button (5) until "YES" is
highlighted and press the "SNOOZE" button (3). Select "NO" in order not to save the
changes.
"Display" (select display mode)
"ID3" = display of ID3 information stored in the MP3 audio file
"FREQ CHART" = modulation display for different frequency ranges
"CLOSED" = no display
"LYRIC" = lyrics are displayed

This requires a so-called LRC file with the same file name as the MP3 file. This
is a mere text file which you can also generate yourself (e.g. with a text editor
or with programs available on the Internet).
Example:
MP3 file name:
LRC file name:
Example of the content of an LRC text file:
[ti]Song title
[al]Album
[00:11]Lyrics line 1
[00:25]Lyrics line 2...
The time determines exactly at what position of the song a line is to be displayed by the
multimedia player.
64
TEST.MP3
TEST.LRC
Operating manual

English