Panasonic CF-VDM302U Bedienungsanleitung Seite 20

Using the Software
When a CD/DVD cannot be formatted with Drag-to-Disc, try formatting it with the ad-
ministrator authority.
When you have formatted a disc with Drag-to-Disc, remove the disc once before using
it.
Windows Vista
If a standard user has written a fi le to an unformatted CD-RW/DVD-RW/DVD+RW,
formatting may be performed without display of the format confi rmation and progress
bar. Wait until the progress bar for fi le writing appears.
Do not click [Cancel] while formatting a CD-RW/DVD-RW/DVD+RW.
Do not click [Cancel] while writing files to an unformatting a CD-RW/DVD-RW/
DVD+RW.
In the following cases, click (Start) - [Computer], right-click [DVD RW Drive(X:)],
E
select [Disable Drag-to-Disc for this drive] from the menu and disable Drag-to-Disc.
• When you perform the standard format procedure prepared by Windows Vista.
• When you write to a disc formatted by the above procedure.
When you restart your computer, Drag-to-Disc is enabled again even if it is disabled ac-
cording to the above procedure. Resetting Drag-to-Disc to disable is necessary.
Information
If "Easy Media Creator" does not operate properly, we recommend carefully reading the
online help fi le fi rst for problems with the operating environment or operations.
Then install the latest Windows Service Pack.
If you still cannot troubleshoot the problem, contact Panasonic Technical Support.
For further information, refer to the following URL.
http://www.roxio.com/
20