E) Bluetooth ® Operation - Renkforce RF-DAB-CAR1 Bedienungsanleitung

e) Bluetooth
To permit best phone reception and keep electromagnetic irradiation in the vehicle
as low as possible, always use an outside aerial in mobile phone operation.
In Bluetooth
mobile phones and/or as playback device for Bluetooth
Before transmission between your mobile phone or Bluetooth
receiver is possible, however, both devices must be coupled. This process is called
„pairing".
Pairing
• Switch on the car receiver.
• Switch your mobile phone on and activate the Bluetooth
mobile phone for this).
• Activate the scan for other Bluetooth
• When the car receiver is found, your Bluetooth
car receiver (RF-DAB-CAR1).
• Connect your mobile phone to the car receiver.
• Enter the password 0000 if necessary to couple the two devices.
• After successful pairing, the display (7) shows the Bluetooth
permanently as long as there is no connection).
• If pairing was not successful, try repeating the process. The car receiver may have to be
deleted in your mobile phone first (see mobile phone instructions).
Only one Bluetooth
is an active Bluetooth
first. This is done via the menu of your mobile phone.
If the car receiver or mobile phone with which there is an active connection is
switched off or removed from the reception range, the connection is interrupted.
The Bluetooth
when the mobile phone returns into the reception range of the car receiver again,
the connection is automatically re-established. The display (7) now shows the
Bluetooth
To permit this automatic establishment of connection, this function may have to be
activated at the mobile phone (read about this in your mobile phone's instructions).
40
Operation
®
operation, the car receiver can be used as hands-free system for
®
device at a time can be coupled with the car receiver. If there
®
connection already, this connections must be interrupted
®
symbol in the display (7) flashes. When switching on again or
®
symbol permanently again.
®
®
devices in the reception area at your mobile phone.
®
device displays the Bluetooth
®
A2DP audio streaming.
®
device and the car
®
mode here (see instructions of the
symbol at the top right (flashes
®
name of the
®