Dab Radio Operation; Station Scan; Station Selection; Station Memory - Renkforce RF-DAB-CAR1 Bedienungsanleitung

c) DAB Radio Operation

Station scan

• If no DAB station can be received after selecting DAB mode, perform a station scan (see
"Menu Settings").
The station scan can also be triggered by pressing and holding the
SRC /
• The device will then perform a station scan in the DAB reception range and saves the
stations found in the station list.
• During the search, the display (7) shows progress and the number of stations found.

Station Selection

• Press the PS/
• The display (7) shows the station list.
• Use the rotary control MENU (4) to select the desired station.
• Push the rotary control MENU (4) to play back the selected station.

Station memory

The car receiver has 20 station memories on which you can store your favourite stations.
• Set the station to be stored as described under „Station Selection".
• Press and hold the PS/
• Use the rotary control MENU (4) to select the desired station memory.
If a memory location is already occupied, the corresponding station name is
displayed there.
• Push the rotary control MENU (4) to save the station.
• To play a station from the station memory list, press and hold the PL /
the station memory list is displayed.
• Use the rotary control MENU (4) to select the desired station.
• Push the rotary control MENU (4) to play back the selected station.
38
button (1).
button (2) or the PL /
button (2) until the station memory list is displayed.
button (5) briefly.
button (5) until