Mechanical Installation - Renkforce RF-DAB-CAR1 Bedienungsanleitung

12 USB interface audio playback

8. Mechanical Installation

The car receiver comes with two different holders.
The device can therefore be mounted on the cigarette lighter with the aid of a gooseneck or as
an alternative it can be mounted on a ventilation grille.
When mounted on the cigarette lighter, the power supply is already integrated in the holder.
A corresponding cigarette lighter adapter is included for power supply when mounted on a
ventilation grille.
Please select the place of installation carefully so that the device neither influences
the driver's activity nor distracts him from the traffic.
No parts must be installed in the airbag trigger area because this may cause injury
to the vehicle passengers in case of accident.
Use the supplied installation material to guarantee a safe installation.
Any changes in the vehicle that become necessary for the installation of the car
receiver or other components must be carried out in such a way that neither traffic
security nor the stability of the car are affected. With many cars, the type approval
will lapse if you merely saw out a section of the sheet metal.
When installing the car hi-fi system, take into consideration the risk of accident
which can arise from devices being torn away in the case of an accident. Therefore,
you should secure every component in a place where it cannot be dangerous to
passengers.
12
31