Usb Operation; Playback Control - Renkforce RF-DAB-CAR1 Bedienungsanleitung

d) USB Operation
The device is equipped with a USB interface. MP3 files stored on a USB storage medium can
be played back.
Do not connect any MP3-player to the USB interface if it is battery-operated. The
USB interface power supply may load the inserted batteries and cause overheating
or explosion of a battery.
USB media up to 64 GB and a power intake of up to max. 500 mA can be
connected to the USB interface. The media must be formatted in FAT 32.
Only USB storage media can be operated at the USB socket. MP3 players with a
USB port usually switch into PC mode when this port is connected. In this mode,
music files cannot be played. However, you may connect the audio output of your
MP3 player to the audio input AUX IN (9).
Due to the great variety of USB storage media and their different functions, some
of which are very producer-specific, we cannot guarantee that all media will be
recognized and that all the operational functions are available on this device.
If the storage medium is not recognised, remove it and insert it again.
• Insert your USB storage medium into the USB interface for audio playback (12).
• The player switches to the respective input automatically and starts playback.

Playback control

Button /
Button PS/ (2)
Button PL / (5)
(6)
Starts or stops playback
Jumps back one title
Jumps forward one title
39