Werbung
Getting started
1. Place the machine on a flat surface.
GB
When starting the machine for
the first time, fill the tank with cold
water. Start the machine with the
ON/OFF switch. Let a full tank of
water pass through the machine
once or twice to clean it, without
using paper filter or coffee.
4. Start the machine with the ON/
OFF switch. The power indicator
light will come on and hot water
will flow into the filter. When water
has stopped flowing, the warming
plate keeps the coffee hot until
the machine is turned off with the
ON/OFF switch. If the machine is
not turned off manually, the Safety
Auto-Off function turns it off after
40 minutes.
2. Making coffee: open the lid and fill
the water tank with fresh cold water
up to the desired level. There is a
Water level indicator for 2–10 big
cups / 3–15 small cups inside the
water tank.
The machine must not be used
with empty tank!
5. If the jug is removed, the filter
valve prevents coffee from dripping
onto the warming plate.
While boiling, the jug must not
be removed for longer than 30
seconds or the filter will overflow.
3. Insert a size 1x4 paper filter in the
filter holder and fill it with ground
coffee. For average strong coffee
one measuring spoon (approx. 6-7
g) per cup is sufficient. Close the
water tank lid and place the jug
(complete with lid) onto the warm-
ing plate.
6. The Aroma Selector extends the
brewing time to maximize the fla-
vour extraction and get a stronger
coffee for a small number of cups
(normally less than 6). Press the
Aroma button, the light will turn on.
D
GR
NL
F
GB
17
Werbung
