English; Getting Started; Other Functions - AEG KF7 Serie Gebrauchsanweisung

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Option button
B. Set button
C. Scroll up ( ) button
D. Scroll down ( ) button
E. LCD Display
F. Aroma button
G. Auto/Start button
H. Brew button
I. Cancel button
J. Removable water tank
Picture page 2-3

GETTING STARTED

1
Before first use. Place the machine on a flat surface. When starting the machine for the first time, fill the tank with
cold water. Press the Option button twice. The display will show "AUTO CLEAN". Press the Set button to confirm. Let
a full tank of water pass through the machine once or twice to clean it, without using coffee.
2
Making coffee: open the lid and fill the water tank with fresh cold water up to the desired level.
Note: The water tank is removable. There is a gauge for cups on the water tank and on the coffee jug (for the Coffee
maker with Glass jug only). The machine must not be used with empty tank!
3
Insert the permanent coffee filter in the filter holder and fill it with ground coffee. For average strong coffee one
measuring spoon (approx. 6-7 g) per cup is sufficient. Close the water tank lid and place the jug (complete with lid)
onto the warming plate.
4
Start brewing coffee instantly: Press the Brew button. If you want to pause the brewing, press the Brew button
again. When the brewing process is finished the appliance will enter keep warm mode (for the Coffee maker with
Glass jug only).
5
Press the Cancel button to stop a selected operation, the appliance will enter standby mode.
Note: Press and hold the Cancel button for two seconds to turn off the display.
6
If the jug is removed, the filter valve prevents coffee from dripping onto the warming plate. While boiling, the jug
must not be removed for longer than 30 seconds or the filter will overflow.

OTHER FUNCTIONS

7
Adjusting the clock: Press and hold the Set button until the time (hours) on the display starts flashing. Press the
Scroll up ( ) or Scroll down ( ) button to change hours, then press the Set button to confirm. Set minutes (and AM
or PM) by using the ( ) or ( ) button, press the Set button to confirm.
Note: If no button is pressed the appliance will automatically close the clock setting interface after 5 seconds..
8
Brewing coffee with the program time setting: Press and hold the Auto/Start button until the display shows the
time and the program time indicator. Set the time by using the ( ) or ( ) button, press the Set button to confirm.
Press the Auto/Start button to start or pause the program time setting.
9
Adjusting the keep warm temperature (for the Coffee maker with Glass jug only): Press the Option button.
Choose the desired temperature (High/Medium/Low) by pressing the ( ) or ( ) button. Press the Set button to
confirm.
10
The Aroma Selector extends the brewing time to maximize the flavour extraction and get a stronger coffee for a
small number of cups (normally less than 6). Press the Aroma button to adjust the aroma setting.
11
The display will show "Change Filter" after 60 brew cycles, to let the user know that the PureAdvantage™ water filter
needs to be replaced. Place the filter into a container of clean cool water, and let soak for 10 minutes.
www.aeg.com
KF78xx79xx_AEG_NO-FARSI.indd 6
K. Water level indicator
L. Hinged lid
M. Water filter holder with Active carbon filter cartridge
N. Filter holder with anti-drip valve
O. Permanent coffee filter
P. Coffee jug with fresh water graduation on both sides*
Q. Warming plate*
R. Extendable power cord & plug
S. Measuring spoon
T. Stainless steel thermo jug with a trigger*
* Depending on model
6
2017-07-06 13:10:32