Herunterladen Inhalt Inhalt Diese Seite drucken

Batteries / Rechargeable Batteries; Operating Elements; Software Installation - VOLTCRAFT PL-125-T2USB Bedienungsanleitung

Temperatur-messgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Do not switch the product on immediately after it has been taken from a cold to a warm
environment. The condensation that forms might destroy the product. Allow the product
to reach room temperature before switching it on.

Batteries / Rechargeable batteries

Correct polarity must be observed while inserting the batteries.
Batteries should be removed from the device if it is not used for a long period of time to
avoid damage through leaking. Leaking or damaged batteries might cause acid burns
when in contact with skin, therefore use suitable protective gloves to handle corrupted
batteries.
Batteries must be kept out of reach of children. Do not leave the battery lying around, as
there is risk, that children or pets swallow it.
All the batteries should be replaced at the same time. Mixing old and new batteries in the
device can lead to battery leakage and device damage.
Batteries must not be dismantled, short-circuited or thrown into fire. Never recharge
non-rechargeable batteries. There is a risk of explosion!
Miscellaneous
Consult an expert when in doubt about operation, safety or connection of the device.
Maintenance, modifications and repairs are to be performed exclusively by an expert
or at a qualified shop.
6.

oPERATINg ELEMENTS

1.
Sensor connection ports
2.
▲T1·T2 button
3.
LC display
4.
UNITS button
5.
REC ENTER button
7.

SofTWARE INSTALLATIoN

The software included provides an interface for retrieving the recorded data from the measuring
instrument. You will need a CD-ROM drive on your computer to install the software.
1.
Insert the CD into the CD-ROM drive of the personal computer (PC).
2.
The installation should start automatically. If not, open the CD-ROM drive in your operation system
and run the "setup.exe" by double-clicking it.
3.
Click the button NEXT to continue the installation process.
22
6.
USB socket
7.
HOLD ▼ button
8.
On / off button
9.
◄ MAX MIN button
10.
SET button

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis