Maintenance - PeakTech 1655 Bedienungsanleitung

Please dispose of old batteries at a council collection point or return them to a local shop at no
cost. The disposal in domestic refuse is strictly forbidden according to the Battery Regulations. You
can return used batteries obtained from us at no charge at the address on the last side in this
manual or by posting with sufficient stamps.
Batteries, which contain harmful substances, are marked with the
symbol of a crossed-out waste bin, similar to the illustration shown
left. Under the waste bin symbol is the chemical symbol for the
harmful substance, e.g. „Cd" for cadmium, „Pb" stands for lead and
„Hg" for mercury.
You can obtain further information about the Battery Regulations from the Bundesministerium für
Umwelt, Naturschutz und Reaktorsicherheit (Federal Ministry of Environment, Nature Conservation
and Reactor Safety).

8. Maintenance

Maintenance consists of periodic cleaning and battery replacement. The exterior of the instrument
can be cleaned with a dry clean cloth to remove any oil, grease or grime. Never use liquid solvents
or detergents.
Repairs or servicing not covered in this manual should only be performed by qualified service
personnel.
All rights, also for translation, reprinting and copy of this manual or parts are reserved.
Reproduction of all kinds (photocopy, microfilm or other) only by written permission of the
publisher.
This manual considers the latest technical knowing. Technical changings which are in the interest
of progress reserved.
We herewith confirm, that the units are calibrated by the factory according to the specifications as
per the technical specifications.
We recommend to calibrate the unit again, after 1 year.
®
08/2012/Pt.
PeakTech
PeakTech Prüf- und Messtechnik GmbH - Kornkamp 32 - DE-22926 Ahrensburg / Germany
+49-(0) 4102-42343/44
info@peaktech.de
+49-(0) 4102-434 16
www.peaktech.de