Connecting The Appliance - FLORABEST FBC 7 A1 Bedienungsanleitung

Connecting the appliance

GB
IE
IMPORTANT
This Programmable Water Timer may only be connected to a
drinking water outlet fi tted with a safety device that corresponds
to at least TYPE HD as per EN 1717 (non-return valve with
pipe ventilation).
► Appropriate adapters are commercially available.
NOTICE
► The appliance is equipped with a coupling nut
taps with a 33.3 mm thread (G1"). The adapter
connect the appliance to water taps with a 26.5 mm thread
(G ³/₄"). Should leaks/spills be encountered when using the
adapter
the tap with Tefl on sealing tape.
♦ For a 26,5 mm thread (G ³⁄₄"): Screw the adapter
water tap.
♦ Screw the coupling nut
resp. the adapter.
♦ Screw the coupling unit
the connect a hose to the coupling unit.
♦ Open the water tap.
10
11 , it is recommended that you wrap the thread of
6
12
onto the thread of the water tap
onto the hose connection. You can
for water
6
11 is used to
onto the
11
FBC 7 A1