Cleaning The Device - Hama MW1002 Bedienungsanleitung

Cleaning the device (CLEAN)
NOTE
► To achieve a precise reading, make sure that there
is no leftover alcohol in the measuring chamber
prior to each alcohol test.
u Start the cleaning process according to the chapter
entitled "Changing the settings".
u Press the "+/ " button [7] to start the cleaning process.
ON is shown in the display [1], followed by a countdown
from CL08 to CL00. OFF is displayed when the cleaning
process is finished.
u Press the SET button [8]. The time is shown in the
display [1].
MW-1002
GB
37