Setting The Time (Clock); Setting The Unit Of Measurement - Hama Mw1002 Bedienungsanleitung

d Bedienungsanleitung

Setting the time (CLOCK)

GB
NOTE
► The time and programmed settings must be reset
after the batteries are changed.
u Set the time according to the chapter entitled "Changing
the settings".
u Set the minutes by pressing the "+/ " [7] or "-" [16]
buttons, then press the SET button [8].
u Set the hour by pressing the "+/ " [7] or "-" [16]
buttons.
u Press the MODE button. The time display flashes
several times in quick succession. The time is shown
in the display [1].
Setting the unit of measurement (UNIT)
You can switch between the units "‰ BAC" (BAC = blood
alcohol content) and "mg/l".
u Set the unit of measurement according to the chapter
entitled "Changing the settings".
u Press the "+/" [7] or "-" [16] button to select the
appropriate unit of measurement. This unit is then
shown on the display [2 or 10].
u Press the SET button [8] to save the setting. The
display flashes several times in quick succession and
the device exits the settings mode.
36
MW-1002