Unpacking And Setting Up - Silvercrest SWW 1500 B2 Bedienungsanleitung

RP90993 Wärmewelle LB6 Seite 7 Freitag, 9. August 2013 4:29 16
otherwise the floor might be scratched
or scorched.
1. Unpack the
packaging.
2. Remove the transport packaging.
3. Check that the appliance shows no signs
of damage.
5.1 Assembling the appliance for set-up
on the floor
1. Screw the feet 3 to the underside of the
appliance using the screws provided.
Insert 2 screws for each foot.
SWW 1500 B2

5. Unpacking and setting up

appliance from the .
Warning! Check that there is
sufficient distance from the wall,
fixtures and other appliances.
When setting up on the floor, the
distance must be at least 0.5 m to
exclude the risk of fire.
The distance to the wall must
always be observed unless you are
using the wall hooks supplied. The
wall should not be flammable.
2. Select a location in compliance with the
safety information
instructions" on page 3).
5.2 Mounting the appliance on a wall
Caution!
• The wall must not be flammable and
should also be strong enough to bear
the weight of the appliance.
(see "4. Safety
7