Trouble Shooting - WOLFF JUNIO-STRIPPER 03 Betriebsanleitung

5.0 Use
5.1 Assembly
For your safety the JUNIO-STRIPPER comes with the blade not
mounted. It is fitted directly at the buttom of the striker
5.2 Switch-on/off
Switch-on
Start the machine by pushing switch A forward.
The switch aressts automatically.
The machine keeps running
Switch off
Press the switch at the rear part (B).
The switch gets released and the machine is switched off.
5.3 Use
The JUNIO-STRIPPER is designed to remove foam adhesive or
flooring residues. Also for the removal of floor coverings on
stairs and in unaccessable areas, as well as for removal of glass
fibre wall lining.

6.0 Trouble shooting

Trouble Eventual cause
Machine does not work Power supply
Disconnected
Blown fuse
Defective cable or plug
Undue force necessary Blade is blunt
or excessive vibration
Excessive vibration Expendable parts are
worn out
11/2004
Elimination
Have machine
repaired by a qualified
electrician
resp. change parts
Change blade
Return machine for
service and/or repair
JUNIO-STRIPPER 03, Artikel-Nr. 016876
B
A
9