Default Set; Language; Anynet+ (Hdmi-Cec) - Samsung HMX-U20RP Benutzerhandbuch

system setting

Default Set

You can initialise your camcorder settings to the factory defaults
(initial settings at the factory). Initialising the camcorder settings to
factory defaults does not affect recorded images.
1. Press the MENU button
2. Press the
3. Select "Yes" with the
• Select "No" to cancel the Default Set.
• All setting values are initialised to the factory default.
• After resetting the camcorder, reset the "Date/Time Set."
• Do not turn off the power while Initialising the settings.
• The "Default Set" function does not affect the files recorded on
the storage media.

Language

You can select a language in which to display the menu and messages.

Anynet+ (HDMI-CEC)

This camcorder supports Anynet+. It is an AV network system that enables you to control all
connected Samsung AV devices with an Anynet+ supported Samsung TV remote control.
1. Press the MENU button
2. Press the
3. Select the desired submenu item with the
OK button.
4. Press the MENU button to exit the menu.
Submenu items
• Off: Disables the function.
• On: The Anynet+ function is enabled.
• When you turn on your camcorder and it is connected via an HDMI cable to a TV that supports
Anynet+, the camcorder's Anynet+ (HDMI-CEC) function automatically turns on. If you do not want
to use the Anynet+ function, set "Anynet+ (HDMI-CEC)" to "Off."
• For details on the Anynet+ (HDMI-CEC) function, refer to the user manual of the Samsung TV with
58
Anynet+.
/ button
/ button "Default Set"
/ /OK button.
/ button
/ button "Anynet+ (HDMI-CEC)"
"Settings."
OK button.
page 23
"Settings."
OK button.
/ button.
Menu
page 24
Menu