Charging The Battery; Using The Built-In Usb Jack - Samsung HMX-U20RP Benutzerhandbuch

getting started

Charging the battery

PRECHECK!
• Be sure to charge the battery before you start using your camcorder.
• Use the AC adaptor supplied with the camcorder or the built-in USB jack.
1. Press the Power (
camcorder.
2. Charge the battery using the adaptor or
USB.
• The charging (CHG) indicator lights up
and charging starts. After the battery
is fully charged, the charging (CHG)
indicator turns green.
Using the
AC power
adaptor
Using the
built-in USB
jack
Please make sure that there are no foreign substances in the plug and socket when you connect the
AC power supply to the camcorder.
•
When charging, if both the built-in USB jack and AC power adaptor are connected, the AC power
adaptor will override the USB.
16
• Start charging the battery after turning off the camcorder by pressing the Power (
) button to turn off the
page 17
Connect the AC power
adaptor to the camcorder
properly and plug the AC
Power adaptor in the wall
outlet.
Connect the built-in USB
jack of the camcorder to the
USB jack of a PC.
• Use the USB cable (not
supplied) according to
the environment the PC is
used in.
Using the AC power adaptor

Using the built-in USB jack

) button.