Herunterladen Inhalt Inhalt Diese Seite drucken

Pflege Und Wartung; Computer (D); Functietoetsen; In Principle, The Equipment Does Not Require - finnlo Loxon XTR Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Loxon XTR:
Inhaltsverzeichnis

Werbung

4. Pflege und Wartung

Wartung
Grundsätzlich bedarf das Gerät keiner Wartung
Kontrollieren Sie regelmäßig alle Geräteteile und den
festen Sitz aller Schrauben und Verbindungen
Tauschen Sie defekte Teile über unseren Kunden-
service sofort aus. Das Gerät darf dann bis zur
Instandsetzung nicht verwendet werden.
Pflege
Zur Reinigung verwenden Sie bitte nur ein feuchtes
Tuch ohne scharfe Reinigungsmittel. Achten Sie darauf,
dass keine Flüssigkeit in den Computer gelangt.
Bauteile, welche mit Schweiß in Kontakt kommen, brau-
chen nur mit einem feuchten Tuch gereinigt werden.
5. Computer

5.1 Functietoetsen

Pijltjestoetsen:
Verhoging/ verlaging van functiewaarden en
weerstandsniveaus. Langer indrukken activeert de
automatische waardezoeker.
Programmatoetsen:
Elke programmatoets is aan een profiel toegewezen.
ENTER:
Door indrukken kan een functie worden bevestigd.
HR1, HR2, IND:
In de hartslagprogramma's zijn al hartslagpercentages voor uw
training opgeslagen. HR1: 65%, HR2: 90% en bij IND kunt u de
maximale waarde zelf bepalen.
DATA:
U kunt trainingsgegevens opvragen, zoals de totale trainingsduur
of gegevens van de individuele trainingseenheden.

4. Care and Maintenance

Maintenance

In principle, the equipment does not require

maintenance.
Regularly inspect all parts of the equipment and the
secure seating of all screws and connections.
Promptly replace any defective parts through our
customer service. Until it is repaired, the equipment
must not be used.
Care
When cleaning, use only a moist cloth and avoid harsh
cleaning agents. Ensure that no moisture penetrates
into the computer.
Components that come into contact with perspiration,
need cleaning only with a damp cloth.
5. Computer

5.1 Computer keys

arrow keys:
Program selection or increase/decrease of values as well the
resistance. A longer press will start the automatic value finder.
ROGRAMS:
Each button stands for a special program.
ENTER
By pressing this key, a function will be confirmed.
HR1, HR2, IND:
There is already a percentage of your exercise heartrate saved.
HR1= 65%, HR2: 90% and for IND you are able to set your own
trainings heartrate.
DATA:
Exercise data, like odometer or single data can be checked.
10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis