Technical Data Sendai Pro - HASE Sendai Pro Bedienungsanleitung

11. Technical Data Sendai Pro

The Sendai Pro, certified in compliance with DIN-EN 13240 and Art. 15 a B-VG
(Austria), can only be operated when the fire box is closed. Conforms with the DIBt
(Deutschen Institut für Bautechnik/German Institute for Building Technology) approv-
al criteria for direct vent fireplaces for solid fuels. Multiple connections to the chim-
ney are possible, see point 4. "Connection of Multiple Devices in Direct Vent
Operation".
DIBt approval number: Z-43.12-396 / Typ FC61x
The following data applies to the chimney characteristics in accordance with
EN 13384-1 / 2:
Combustion Values*
Nominal Thermal Output
Room heating output
Exhaust gas temperature
Waste Gas Outlet Temp.
Waste Gas Mass Flow Rate
Min. Supply Pressure at Nominal Thermal Output**
Efficiency
CO content
Particulate
OGC
NO
X
Min. required combustion air volume
Depending on the insulation of the building, the nominal thermal output of 6,5 kW
indicated on 25 - 90 m² (subject to change).
Dimensions:
Stove
Fire box
Weight Sendai Pro
Weight wood box
Weight 1x heat retaining block, flue pipe connection top/rear
Weight 1x heat retaining block, flue pipe connection laterally
Flue pipe diameter
Pipe diameter of Hase ventilation system**
Wood
6,5 kW
7,2 kW
227 ˚C
272 ˚C
6,1 g/s
12 Pa
83 %
1000 mg/Nm³
25 mg/Nm³
92 mg/Nm³
128 mg/Nm³
25 m³/h
* Test bench performance and values at 13% O
** For separate air supply in low-energy houses and insufficient combustion air supply in the room where
the stove is installed.
Height Width
134 cm 60 (+38) cm
36 cm 35 cm
2
Depth
40 cm
27 cm
191 kg
70 kg
56 kg
42 kg
15 cm
10 cm
GB
43