General Information - HASE Sendai Pro Bedienungsanleitung

Contents
1. General Information
1.1 Definition of Safety Notes
2. Control Elements
3. Safety Distances
4. Connection of Multiple Devices in
Direct Vent Operation for Sendai Pro
5. Fuel Load Sizes and Thermal Output
5.1 Wood Briquettes
6. Initial Operation
7. Lighting the Fire
8. Adding Fuel / Heating at Nominal
Thermal Output
9. Heating at Low Thermal Output
(during Transitional Seasons)
10. Emptying the Ash Drawer
11. Technical Data Sendai Pro
Annex
Product data sheet
Type labels
DIBt conformity mark Sendai Pro
Energy efficiency label
Page 1.

General Information

37 This section contains important information on using
37 this technical documentation. Utmost care was tak-
38 en in preparing this document. Nevertheless, sug-
39 gestions for improvement and comments regarding
any errors are always welcome.
40
40 © Hase Kaminofenbau GmbH
40
1.1 Definition of Safety Notes
40
41
WARNING!
This symbol alerts you to a potentially
41
hazardous situation. Non-compliance with
42 this warning can cause severe injuries, or
even death.
42
43
CAUTION!
This symbol alerts you to a potentially
hazardous situation. Non-compliance can
cause damage to property or injuries to
88 persons.
90
90 NOTE!
91 Provides additional tips about using the
stove as well as useful information.
ENVIRONMENT!
Sections marked with this symbol provide
information about safe and environmen-
tally-friendly operation as well as environ-
mental laws and regulations.
GB
37