Safety Instructions; General - Honeywell ACCK 50 Bedienungsanleitung

16
Contents
1. Safety instructions
2. General
3. Applications/functions
4. Handling of ID cards
5. Programming card set
6. Setting of DIP switches
7. Initial commissioning
8. Operating displays
9. Time zones
10. Authorize/disable ID cards
11. Programming of door code
12. Setting date and time
13. Technical data
14. Using the device correctly
15. EC declaration of conformity

1. Safety instructions

Read these instructions carefully and thoroughly before installing and putting
the unit into operation. It contains important information on installing and pro-
gramming.
Use the unit only
- for the intended purpose and
- when technical installation has been completed correctly.
The manufacturer is not responsible for damage which was caused by use
contrary to the rules.
Store the programming cards in a safe place to prevent manipulation of access
rights.
Installation, maintenance and repair work may only be carried out by autho-
rized skilled personnel.

2. General

ACCK stands for access control contactless, the "K" indicates that the version in
question has a keyboard. The figure 50 is an internally allocated number.
The unit is based on CMOS technology with low current consumption. Control is via an
8 bit microprocessor. The entered data are stored in a non-volatile memory and remain
safe in case of a voltage failure.
Operating Manual ACCK 50
Page
16
16
17
18
18
20
21
21
22
23
25
25
26
26
27