Voltage Supply; Wiring Diagram; Connection Cable; Flange Connector - Stübbe ZE 3075 Originalbetriebsanleitung

Type Spacing L (mm)
165 200
170 200
185 200
200 200
NOTE
Always work in
recognised technical rules.
The prerequisite for perfect function is
professional execution of the work.

10.3 Voltage supply

DANGER
Connection and start-up require expert
knowledge!
Caution - Danger to life!

Only allow an authorised electrician

to connect and start up the unit.
Ensure that the connection

assignment is carried out in
accordance with the wiring diagram.

10.4 Connection cable

The unit is connected with a
commercially available unshielded
cable.
Where electro-magnetic interference
above the EN 61326 test values for
industrial areas is to be expected, we
recommend the use of a shielded
cable.
Cable cross section: max. 0.75 mm
cable outer diameter: 6 ... 8 mm.
Document 330619 – 2014/02/26
accordance with

10.5 Flange connector

2
the
1. Signal (+)
2. Signal (+)
3. n.c.
4. n.c.

10.6 Circuit diagram

1. Signal (+)
2. Signal (- )
3. n.c.
4. n.c.
11. Commissioning/initial
start-up
2
DANGER
Check all units and pipework components
prior to commissioning/start-up!
Damage to connection units and

components.
4
U
(-)
2
4
(+)
1
I
7