General Functions; Zero-Tracking - KERN PNJ Betriebsanleitung

10 General functions

10.1 Zero-tracking

This function is used to tare small variations in weight automatically.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the "stability
compensation". (e.g. slow flow of liquids from a container placed on the balance,
evaporating processes).
When apportioning involves small variations of weight, it is advisable to switch off this
function.

PNJ_PNS-BA-e-1814
Call up menu:
Press the F-key and keep pressed until „Func" is
displayed.
When releasing the button, the first function „1.b.G.„ is
displayed with the current setting
Enable/disable zero-tracking function:
Press F-key repeatedly until „3.A0." with the current
setting is displayed.
Use the TARE-key to select the desired setting.
„3.A0 1" Function activated
„3.A0 0" Function deactivated
Save / back to weighing mode:
Confirm setting with SET-key. The balance returns to
weighing mode.
53