Step 9.4 Installing The Connection Profiles - Babboe Mini Bedienungsanleitung

Step 9.4
INSTALLING THE CONNECTION PROFILES
PARTS
• 4 connection profiles
• Sachet F
Please note
The nuts and bolts should only be hand-tightened while assembling the box. There should
be some slack remaining in the box. Some slack is necessary in order to attach the box
to the bottom panel. After installing the box onto the frame, the connections should be
tightly secured using tools.
These steps describe how to install the connection profiles first. They all fit only in 1 spot
and are installed on the inside of the box.
1. Install the two long connection profiles to the rear panel (closest to the handlebar)
using sachet F.
Please note
Only use the top and bottom hole.
39
TOOLS
• Phillips screwdriver
• Ring/open-ended spanner # 10
63