In The Ditch XD Dolly Gebrauchsanweisung Seite 48

TM
4. Re-Insert Break-Over Bar
Keeping both hands on the break-over bar, insert into the receiver tube on the dolly.
5. Swing Break-over Bar to Lower the Dolly
With two hands on the bar, walk the Break-over Bar in an arc to gently lower one end of the dolly side frame.
ALWAYS KEEP BOTH HANDS ON THE BREAK OVER BAR WHILE LOWERING
THE DOLLY!
6. Lower the Remaining Dolly Sides Repeat steps one (1) through three (3) to fully lower both dollies.
7. Remove and Collapse Dolly Axles
8. Re-engage Dolly Cam-locks Rotate the tires upward on the dollies. Re-engage the Cam-Locks to secure the tires and
ease transportation of the dollies.
Operations Manual
WARNING
28