In The Ditch XD Dolly Gebrauchsanweisung Seite 44

Operations Manual
24
TM
3. Position Dolly Side Frames
A. Rotate Cam locks to release tires from storage position.
B. Allow wheel pivot arms to rotate then re-engage Cam locks. Cam locks will engage in dents to assist positioning of the
dolly.
4. Connect Dolly Axles to Dolly
Place the Engagement Tabs into Axle Cradles.
Note: Assure both dollies use identical cradle positions, such that dolly axles are parallel to each other and perpendicu-
lar to side frames.
5. Insert Break-over Bar
Insert the break-over bar into the dolly's break-over bar receiver tube.
VIDEO ONLINE
www.intheditch.com