Functional Description; Button Operation - Vestamatic DZ-Plus R Bedienungsanleitung

83200211 F1.qxd 25.09.01
Even when using several Vestamatic DZ-Plus "R" roller shutter con-
trols, you can operate each control either with the internal buttons
"extend" (q) and "retract" (Q) or with an external central button.
You can select any button make and design. Only buttons with notched
positions are not permissible.
A Vestamatic, , , switching timer, e.g. Rolltec Plus potential-free 3 sec-
onds, can be used instead of a central button.
You can connect any number of roller shutter controls Vestamatic
DZ-Plus "R" to a central button or a Vestamatic switching timer.
15:55 Seite 17

Functional Description

- 17 -
G

Button Operation

By shortly tapping the up or down button, the drive will move into the
desired direction.
Shortly tap the opposite button in order to stop the drive before it
reaches its totally traveled position.
Manual/Automatic Switch
In position (H) (manual), the roller shutter control Vestamatic DZ-Plus
"R" can only executed one up or down command.
In position (A) (automatic) commands from the roller shutter control
Vestamatic DZ-Plus "R" and commands from the central button can
be executed simultaneously.
As long as an up or down command from the central button is pend-
ing, no single command can be executed from roller shuter control
Vestamatic DZ-Plus "R".
The duration of the up or down command of the roller shutter control
Vestamatic DZ-Plus "R" was preset to 120 seconds by the manu-
facturer.
- 18 -
G