Cleaning Milk System" Programme - Melitta Barista TS Bedienungsanleitung

Care and maintenance
4. Use the arrow buttons to select Start
and confirm with "menu/ok".
5. Follow the further instructions on
the display up to the end of the "Easy
Cleaning" programme.
» The ready symbol appears on the
display.
9.5 "Cleaning milk system"
programme
This programme is used to clean the milk
system with the aid of a milk system clean-
ing agent.
To maintain hygiene and avoid damage
to the appliance, we recommend carrying
out the cleaning programme once a week.
The cleaning programme takes approx-
imately 3 minutes and should not be
interrupted.
ATTENTION
The use of unsuitable milk system clean-
ing agents can damage the appliance.
Only use Melitta® PERFECT CLEAN
ƒ
Espresso Machines milk system clean-
ing agent.
Requirement: The ready symbol appears
on the display.
1. Place a vessel with a capacity of at least
0.7 litres beneath the outlet (e.g. the
coffee grounds container).
2. Press the "menu/ok" button for 2 sec-
onds.
» The menu appears on the display.
3. Navigate to the Care > Cleaning milk
system menu.
4. Use the arrow buttons to select Start
and confirm with "menu/ok".
5. Follow the further instructions on the
display up to the end of the milk system
cleaning programme.
» The ready symbol appears on the
display.
58
Cleaning the milk unit
In addition, we recommend cleaning the
milk unit, the milk hose and the milk con-
tainer regularly.
Information
ū The plastic milk container (depending
on the model), without lid and riser
pipe, is dishwasher-safe.
ū The thermal milk container (depending
on the model) and its individual parts
must not be cleaned in the dishwasher.
43
Fig. 23: Removing the milk unit, 1
41
40
43
Fig. 24: Removing the milk unit, 2
1. Pull the milk hose off the appliance.
2. Push the outlet (7) down as far as it will
go.
3. Press the locking mechanism (43) of
the milk unit (40) together using two
fingers and pull the milk unit down-
wards off the outlet.
4. Pull the milk distributor (41) upwards
out of the milk unit.
5. Pull the inlet (42) out upwards.
6. Clean the individual parts with warm
water. Use the enclosed cleaning brush,
7
43
42
43