Using Milk; Emptying The Drip Tray And Coffee Grounds Container - Melitta Barista TS Bedienungsanleitung

4.9 Using milk

Use cooled milk for optimum coffee
enjoyment.
Depending on the model, the enclosed
milk container or the milk hose and con-
ventional milk packs can be used.
Connecting the milk container (depend-
ing on the model)
Only fill as much milk into the milk con-
tainer as will be used immediately.
Fig. 13: Connecting the milk container to
the appliance (figure can vary)
1. Fill the desired amount of milk into the
milk container (38).
2. Push down the outlet (7).
3. Connect the milk hose (37) to the milk
container and the connection (15) at
the outlet.
Information
Store the filled milk container in the
refrigerator.
7
15
38
37
Connecting the milk hose (depending on
the model)
Fig. 14: Connecting the milk hose to the
appliance
1. Push down the outlet (7).
2. Connect the milk hose (37) to the con-
nection at the outlet (15).
3. Insert the milk hose into a conventional
milk pack (39).
4.10 Emptying the drip tray and
coffee grounds container
When the drip tray (9) and the coffee
grounds container (8) are full, the appli-
ance requests you to empty them. The
projecting float (18) also indicates that
the drip tray is full. Always empty both
containers.
18
Fig. 15: Drip tray, coffee grounds container
and float
1. Pull the drip tray (9) forwards out of the
appliance.
Basic operation
7
15
37
39
8
9
47