Melitta Barista TS Bedienungsanleitung Seite 45

Auto Bean Select, BARISTA TS model
2
35
Fig. 8: BARISTA TS 2-chamber bean
container
Auto Bean Select ensures that the best
coffee beans are automatically selected for
various coffee specialities. Espresso-based
beverages take their coffee beans from left
bean chamber 1 (35), Café Crème-based
beverages take them from right bean
chamber 2 (36).
The following table shows the assignment
of the bean chambers to the coffee bever-
ages. These settings can be changed (see
section 6.2, page 51).
Bean chamber Coffee beverage
Espresso, cappuccino,
1 (35)
latte macchiato
Café crème
2 (36)
Information
ū The grinder is emptied during each
grinding process. Nevertheless, mini-
mal coffee type mixing may occur.
ū Grinding when empty causes a differ-
ent type of noise and is normal.
36
30
Manual Bean Select, BARISTA T
2
Fig. 9: BARISTA T 2-chamber bean con-
tainer
Using the "BEAN SELECT" slider (3), you
can switch between the bean chambers
(2).
CAUTION
When switching bean chambers in the
BARISTA T, a residual amount of coffee
beans remains in the grinder. The first
two coffee beverages after switching to
decaffeinated beans may still contain
caffeinated coffee. This may affect the
health of people with caffeine intoler-
ance.
Persons with caffeine intolerance
ƒ
should only consume the third coffee
beverage after switching over.
Information
ū When the slider is in the centre posi-
tion, no coffee beans enter the grinder.
Filling with coffee beans
1. Open the lid of the 2-chamber bean
container (2).
2. Fill coffee beans into the bean cham-
bers.
3. Close the lid of the 2-chamber bean
container.
The "BEAN SELECT" button (30)
(BARISTA TS model) or the "Bean Select"
slider (3)(BARISTA T model) can be used
to select a bean type prior to preparation
(see section 5.6, page 49).
Basic operation
3
45