Effects Parameters - Yamaha DS2416 Bedienungsanleitung

Effects Parameters

REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE
Parameter
REV TIME
INI.DLY
HI.RATIO
LO.RATIO
DIFF.
DENSITY
HPF
LPF
E/R DLY
E/R BAL.
GATE LVL
ATTACK
HOLD
DECAY
1. 0.02 ms–2.13 s (fs = 32.0 kHz, 44.1 kHz), 0.02 ms–1.96 s (fs = 48 kHz)
2. 6.0 ms–46.0 s (fs = 32.0 kHz, 44.1 kHz), 5.0 ms–42.3 s (fs = 48 kHz)
EARLY REF. (early reflections)
Parameter
TYPE
ROOMSIZE 0.1–20.0
LIVENESS
INI.DLY
DIFF.
DENSITY
ER NUM.
FB GAIN
HI.RATIO
HPF
LPF
1. S-Hall (small hall), L-Hall (large hall), Random, Revers (reverse), Plate, Spring
Range
0.3–99.0 s
0.0–500.0 ms
0.1–1.0
0.1–2.4
0–10
0–100%
Thru, 21 Hz–8.0 kHz
50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
0.0–100.0 ms
0–100%
OFF, –60 to 0 dB
0–120 ms
1
2
Range
1
0–10
0.0–500.0 ms
0–10
0–100%
1–19
–99 to +99%
0.1–1.0
Thru, 21 Hz–8.0 kHz
50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
Description
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Low-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
High-pass filter cutoff frequency
Delay between early reflections and reverb
Balance of early reflections and reverb (0% = ER,
100% = reverb)
Level at which gate kicks in
Gate opening speed
Gate open time
Gate closing speed
Description
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10
= live)
Initial delay before reverb begins
Reverb diffusion (left–right reverb spread)
Reverb density
Number of early reflections
Feedback gain
High-frequency feedback ratio
High-pass filter cutoff frequency
149
Effects Parameters
DS2416