Environmental Protection; Maintenance - Ryobi EAG-8512R Bedienungsanleitung

GB
FR DE ES
OPERATING (FIG. 3)
KEEP SAFETY GUARDS IN PLACE.
NEVER COVER THE AIR VENTS SINCE THEY
MUST ALWAYS BE OPEN FOR PROPER
MOTOR COOLING.
The key to efficient operating is controlling the pressure
and surface contact between the disc and work piece.
Flat surfaces are ground at an acute angle, usually 10 to
20 degrees with the work piece. Allow the disc to reach
full speed before starting to grind. Too great an angle
causes concentration of pressure on a small area which
may gouge or burn work surface.
LIVE TOOL INDICATOR
This tool features a live tool indicator (13) which
illuminates as soon as the tool is connected to the supply.
This warns the user that the tool is connected and will
operate when the switch is pressed.

MAINTENANCE

After use, check the tool to make sure that it is in good
condition. It is recommended that you take this tool to a
Ryobi Authorized Service Center for a through cleaning
and lubrication at least once a year.
DO NOT MAKE ANY ADJUSTMENTS WHILE
THE MOTOR IS IN MOTION.
ALWAYS DISCONNECT THE POWER CORD
FROM THE SOCKET BEFORE CHANGING
REMOVABLE OR EXPENDABLE PARTS
(GRINDING DISC, CUTTING DISC, ETC.),
BEFORE LUBRICATING OR WORKING ON
THE UNIT.
WARNING
To ensure safety and reliability, all repairs should
be performed by an AUTHORIZED SERVICE
CENTER or other QUALIFIED SERVICE
ORGANIZATION.
S AV E T H E S E I N S T R U C T I O N S F O R F U T U R E
REFERENCE.
IT NL PT DK SE FI NO RU PL CZ
English

ENVIRONMENTAL PROTECTION

SYMBOL
The following show the symbols used for the tool. Be sure
that you understand their meaning before use.
V.................................................................................Volts
Hz..............................................................................Hertz
..........................................................Alternating Current
W..............................................................................Watts
n..................................................................Rated speed
min .....................Revolutions or reciprocation per minute
-1
.....................................................Double Insulation
...........................................Read instruction manual
.................................Recycle raw materials
instead of disposing as waste. The machine,
accessories and packaging should be sorted for
environmental-friendly recycling.
5
HU RO LV LT EE
Recycle raw materials instead of disposing
as waste. The machine, accessories and
p a c k a g i n g s h o u l d
en-vironmental-friendly recycling.
...............Wear Personal protective equipment
HR SI SK GR TR
b e s o r t e d f o r