Before First Use; Before Using For The First Time; Practical Tips - Moulinex ABM1 Handbuch

Notice_ABM1_2550880-01:Mise en page 1 08/10/10 08:17 Page6
m.The use of non-original elements and accessories may lead to personal injury, damage
to the appliance or faulty operation, and the guarantee will no longer apply.
n. To avoid electric shocks, ensure that your fingers do not come into contact with
the plug pins when you plug in or unplug the appliance.
o. Do not leave the appliance switched on or plugged in while unattended, even for
a few moments, especially where children are present.
p. Do not plug any other appliances into the same plug socket using adapters. Electric
overload is likely to damage the appliance or cause an accident. Only use an
extension after having checked that it is perfect working order.
DESCRIPTION
A - Body of the appliance
B - Speed selector and eject button
C - 1 set of metal whisks
D - 1 set of plastic whisks

BEFORE FIRST USE

- Before using your appliance for the first time, clean the accessories in soapy water.
- Rinse and dry them carefully.
- Use your hand mixer to make light preparations: mayonnaise, whisked egg whites,
sauces, cake dough, pancake batter, etc.
- Do not use it for more than 1 minute for heavier preparations.
- The plastic whisks (D) are especially recommended for preparations in non-stick
containers and for a more silent operation.

BEFORE USING FOR THE FIRST TIME

1. Check that the speed selector (B) is set at "0".
2. Insert the whisks (C or D) into the holes and lock. The whisks must be inserted as
shown in Figure 1. Both the whisks must be of the same length. The "click"
indicates that the accessories are correctly in place.
3. Use identical pairs of accessories.
4. A deep bowl should be used for mixing.
5. Turn on the appliance selecting the speed using the control (B).
6. With the appliance switched off on position 0, push the eject button (B) forwards
to eject the whisks (Fig. 2).

PRACTICAL TIPS

Use speed 1 to start a preparation and to avoid splashing.
To continue, use speed 2.