Setting The System To Bluetooth Standby; Using A Remote Control Application - JVC RV-NB100B Bedienungsanleitung

Setting the System to
BLUETOOTH standby
You can turn on the System using the remote
control application on a BLUETOOTH-enabled
Android device.
To turn on the System via the BLUETOOTH device,
set the System to BLUETOOTH standby in
advance.
Set the System to BLUETOOTH standby.
While the power is turned off...
BT STBY
Press the button again to cancel BLUETOOTH
0
standby. The "BT STBY" indicator goes off.
To cancel BLUETOOTH standby, wait for about
0
10 seconds before performing the operation of
canceling.
When the System is set to BLUETOOTH
0
standby, the BLUETOOTH device can be
connected to the System when the connecting
operation is made on the BLUETOOTH device.
Pressing [BLUETOOTH F] during
0
BLUETOOTH standby turns on the System and
sets the source to "BLUETOOTH".
When you use batteries to power the System,
0
BLUETOOTH standby cannot be set.
To control the power of the System
using remote control application
You need to install the remote control application
0
on your Android device.
1
Set "Bluetooth" to "ON" on the
BLUETOOTH device.
Select "Bluetooth" in "Settings" on your
0
Android device,.
Refer to the instruction manual of your
0
device for further details.
2
Select "RV-NB100" from the device list.
3
Start the remote control application.
4
Control the power of the System using the
"Settings" icon that is located on the
bottom-right of the operation screen.

Using a remote control application

You can control the System remotely by using "JVC
Audio Control BR1", a special remote control
application on an Android device which is
compatible with BLUETOOTH.
To use the remote control application, it is
necessary to register (pair) your Android device
and the System. (p. 17)
NOTE
Search and download the application from
0
Google Play (Play store).
Screens and contents of the application are
0
subject to change.
To use the remote control application, your
0
Android device must be Android OS 2.3 or later,
and compatible with SPP (Serial Port Profile) of
the BLUETOOTH profile.
Some devices may not be recognized or may not
0
work properly.
The following operations can be performed using
the remote control application.
Turning on/off the System
0
Playing back music on a disc, USB device, or
0
iPod
Selecting radio stations
0
Setting the timer
0
Volume adjustment
0
Others
0
Refer to the help page of the remote control
application for operation details.
*The followings are examples of operation screen
of the remote control application.
Left : Example of the CD operation screen
Right : Example of the FM operation screen
CAUTION
To turn on the System using the remote control
0
application, set the System to "BLUETOOTH
standby" in advance.
19