How To Initialize The Setting; Screen Display And Selections In The Reset Mode - JVC TM-A210G Bedienungsanleitung

HOW TO INITIALIZE THE
SETTING
SCREEN DISPLAY AND SELECTIONS IN THE
<SET-UP MENU> RESET MODE
You can set <MENU> and <SET-UP MENU> screen items, picture adjustment items and
the volume level to their factory-set (initial) values.
1. Press the Power (
OFF ( — ).
2. While pressing both MENU button and CHROMA/
PHASE button, press the Power (
the power ON ( _ ).
3. Setting
¶ Initialization is required.
¶ Initialization is not required.
MENU
) switch to turn the power
The <SET-UP MENU> RESET screen is displayed.
Note:
÷
The <SET-UP MENU> RESET screen will not be
displayed if the MENU or CHROMA/PHASE buttons are
pressed for a very short time. Keep pressing them until
the display screen appears.
Press the VOLUME/SELECT [+] button.
* Initialization is completed, and the <SET-UP MENU>
RESET screen disappears.
Press the MENU button.
* Initialization is aborted, and the <SET-UP MENU>
RESET screen disappears.
) switch to turn
<SET-UP MENU> RESET screen
<SET–UP MENU> RESET
Are you sure ?
"Yes" then <+>
"No" then <MENU>
Initial settings
Initialization
Functions (Items)
(setting)
SHARPNESS +03
COLOR SYSTEM AUTO
ASPECT RATIO 4–3
COLOR TEMP. 6500
H. POSITION 00
WHITE BALANCE
R. CUT OFF 00
G. CUT OFF 00
B. CUT OFF 00
R. DRIVE 00
B. DRIVE 00
CONTROL LOCK OFF
STATUS DISPLAY ON
INPUT REMOTE OFF
ASPECT REMOTE OFF
PHASE 00
CHROMA 00
CONTRAST 00
BRIGHT 00
VOLUME 20
11