If Using Windows; If Using A Macintosh - Epson EMP-835 Installationshandbuch

If Using Windows

To set up the computer connection, use the utility software provided with the LAN
card.
Refer to the documentation for the LAN card for instructions on how to use the
utility software.

If Using a Macintosh

The following describes how to set the port to be used for the connection.
Refer to the documentation for the computer and the AirPort card for details on port
settings (network settings).
Procedure
1
Select "System Preferences" - "Network" from the Apple menu.
The network setting window will be displayed.
2
Select a single port to use in the "Port Configurations" box, and then
click "Apply Now".
Select a single port to use.
Tip :
If you set the "Location", you can select a target location and change all network
settings at the same time.
41