Removing The Wireless Lan Card - Epson EMP-835 Installationshandbuch

Inserting and Removing Wireless LAN Cards

Removing the Wireless LAN Card

Caution :
• Do not remove the wireless LAN card while the access lamp of the wireless LAN card is
flashing green, otherwise it may damage the wireless LAN card.
• The wireless LAN card gets hot during and after projector use. Please handle the card
carefully to avoid personal injury or burns.
Procedure
1
Press the eject button above of the card slot.
The eject button will pop out.
2 Press the eject button again.
Enough of the wireless LAN card will be ejected so that you can grasp the edge
of the card and pull it straight out of the slot.
Caution :
Be sure to press the eject button back in to prevent it from being broken or damaged.
20
Eject button
Card slot access
lamp