Epson EMP-835 Installationshandbuch Seite 27

Connecting Using Easy Connect Mode (Wireless LAN)
Entering Characters and Numerals
Perform the following steps to enter characters and numbers using the remote
control.
1. Move the cursor to the item to input, and press the [Enter] button. The cursor
turns green to indicate you are in input mode.
2. To enter numbers, use the numeric keypad
while holding down the [Num].
The [Num] button lights up and the remote
control buttons change to numeric keypad
mode so that you can enter numbers.
To enter a period (.) press the [
characters can be input.
Tilt the [
characters or numbers in the following order:
A-Z → 0-9 → symbols → a-z → space.
Tilt the [
reverse order.
To set your target character quickly, press
and hold the [
through characters.
3. To input subsequent numbers or characters, tilt the [
first number or character is selected and the cursor moves to the second entry
position.
4. After you have entered all the characters, press the [Enter] button to finalise the
entry. The cursor will turn yellow.
26
] button up to select individual
] button down to select them in
] button to rapidly advance
] button
Period
The buttons inside the box will
switch to numeric keypad mode
while the [Num] button is lit.
] button to the right. The
Remote control
Numeric
buttons