Parts Checklist; Installation; Installing And Replacing The Batteries - Swissvoice CP-40 Bedienungsanleitung

Parts checklist

- 1 base
- 1 line cord
- 1 handset
- 1 handset cord
- 1 user manual

Installation

Installing and replacing the batteries

3 AA-Size alkaline batteries for receiving and storing Caller ID records and for storing
frequently used numbers are required.
Important : If you are not going to use the telephone for more than 30 days, remove
the batteries because they may leak and damage the unit.
1. If the telephone line cord is connected, disconnect it from the base unit.
2. Carefully turn the phone, open the battery compartment by pressing gently with a
finger on the battery cover and remove it.
3. Insert 3 AA-size alkaline batteries (not included) as
shown in the illustration.
4. Replace the battery compartment cover.
5. If the line cord was previously connected, dis-
connect and reconnect it to the unit and check your
memory locations.
Installing the phone
Your phone should be placed on a level surface,
such as a desk or table, or you can mount it on a
wall.
1. Connecting the handset.
2. Connecting the telephone line.
CP-40
CP-40
-
+
A A
-
+
A A
-
+
A A
15