Start-Up And Operation - NovoPress AFP 101 Betriebsanleitung

7. Start-up and operation

7.1 Preparing the AFP 101
Warning: Damage is caused to unit by not locking the retaining pin fully.
►Press in retaining pin to the stop and turn 180° to the rear.
7.2 Operation at temperatures below -10°C
• Insert press jaws
• Perform a few dry runs with the AFP 101.
• The tool is ready for operation.
7.3 Press tool and rechargeable battery
Notes on the rechargeable battery
Note: The AFP 101 press tool must only be operated with 9.6 V rechargeable batteries. The
9.6 V rechargeable battery must only be used in the appropriate press tools.
Behaviour of press tool when batteries are almost discharged:
If the battery charge diminishes, the press tool requires significantly more time for the pressing cycle.
The rechargeable battery should be replaced or recharged as soon as possible.
15
AFP 101
EN