Adding A Device With A Hand-Held Transmitter - Oase FM-Master WLAN Gebrauchsanleitung

- EN -
7.12

Adding a device with a hand-held transmitter

"My devices" screen
A maximum of 10 EGC devices or devices with hand-held transmitters can be added to the FM-Master WLAN.
iOS
How to proceed:
1. Tap to open the list with available OASE devices.
When the list is opened, the FM-Master WLAN automatically searches for connected EGC devices.
Devices with hand-held transmitters are marked with an image of the hand-held transmitter in the product
image.
2. Select the desired device with a hand-held transmitter in the list.
For information on the device, tap . If the following prompt is confirmed with "OK", the OASE homepage
with the relevant product information opens in your browser.
3. Tap to add the device.
A prompt for teaching in the hand-held transmitter is displayed.
4. Press the button for teach-in on the device and confirm the prompt with "OK".
The teach-in button is described in the instructions for use of the device.
The manual transmitter has been taught in.
The device has been added to the device list.
5. To give the added device a name, switch to the device overview.
6. Select the desired device in the device overview and tap
A dialogue field will open.
7. Enter the device name and confirm with "OK".
The device name has been assigned.
Android
How to proceed:
1. Touch to open the list with available OASE devices.
When the list is opened, the FM-Master WLAN automatically searches for connected EGC devices.
Devices with hand-held transmitters are marked with an image of the hand-held transmitter in the product
image.
2. Select the desired device with a hand-held transmitter in the list.
For information on the device, tap . If the following prompt is confirmed with "OK", the OASE homepage
with the relevant product information opens in your browser.
3. Tap to add the device.
4. Confirm the query.
5. Enter the device name and confirm with "OK".
A prompt for teaching in the hand-held transmitter is displayed.
6. Press the button for teach-in on the device and confirm the prompt with "OK".
Teach-in of the manual transmitter is complete.
The device has been added to the device list.
The device name has been assigned.
N O T E
When a virtual manual transmitter is used, the device name may also contain descriptions of the keys.
Example for a FM-Master 3:
"Bio pond - 1:Light 2:Skimmer 3:Waterfall"
N O T E
The virtual manual transmitter on the "Home" screen can also be taught in after the device has been
added.
To teach in, actuate the respective button on the virtual manual transmitter.
Teaching-in of the manual transmitter is described in the instructions for use of the added device.
66
.