Beper 90.123N Betriebsanleitung Seite 14

Electronic kitchen scale - Use instructions
WEIGHT MODE FIG. 2
UNIT CONVERSION BUTTON FIG. 3
The unit conversion button is placed under the scale.
It is possible to choose between g, and millimeters ml, and pounds lb and fluid
ounce fl'oz.
Press MODE button to choose the weight unit to calculate between weight, water
and milk volume.
TO START WITH WEIGHING FIG. 4
1.Place the scale on a solid and flat surface.
2.Place bowl on the scale before turning on the scale.
3.Press on/off to enter weighing mode.
4.Wait until LCD shows all information.
5.Load weighing objects on to start weighing, LCD will show the weight reading.
6.If the weighing is water or milk, press MODE button to choose volume mode and
view the volume of weighing object.
VOLUME FIG. 5
1.Place the scale on a solid and flat surface.
2.Press on/off to turn the scale.
3.Wait until LCD shows "0" and press MODE button to choose water or milk mode.
4.Put a liquid container onto the scale platform.
5.Press ZERO button to reset LCD to "0".
6.Pour liquid (water or milk) into the container, LCD shows the volume of the
liquids.
7.Press MODE button to choose « weight » mode and view the weight of liquids.
ZERO OR TARE FUNCTION FIG. 6
To weigh different loads consecutively without removing loads from the scale.
Put first load on the scale, get weight reading.
Press ZERO button to reset the LCD reading to "0" before adding next load. You
can repeat this operation.
ZERO FUNCTION :
When total sum of all loads on scale is lower or equal to 4% of scale's max. weight
capacity (200 gr when capacity is 5000 gr)
LCD shows "---" or "0g" each time ZERO is pressed.
"---" means not stable, please wait for a moment.
"0g" and meanwhile an icon "o" on lower left corner of LCD mean ZERO function
is active.Max. weight capacity remains unchanged.
14