Handset Volume; Last Number Redial; Ringer Volume; Programming A Memory Number - Topcom SOLOGIC TS-6650 Gebrauchsanweisung

7 Getting started
7.1 Making a phone call
To make a phone call, pick up the receiver. Enter the telephone number.

7.2 Handset volume

The handset volume can be adjusted (Low, Medium, High) by the handset volume
switch (4) on the right side of the telephone.

7.3 Last number redial

The last dialled telephone numbers are saved in the redial memory.
1. Pick up the handset.
2. Press , the number will be dialled automatically.
Note: The Redial button
entering a telephone number !

7.4 Ringer volume

When you receive a phone call, the unit will ring. The ring volume can be switched
off with the Ringer switch (3)
7.5 Flash Key
Press the Flash button (R) to use certain services as 'Call Waiting' (if this service is
provided by your telephone company); or to transfer phone calls when you are
using a telephone exchange (PABX).
8 Memory numbers
You can program 3 memory numbers in the phone's memory.

8.1 Programming a memory number

• Pick up the handset.
• Press the program button
• Enter the telephone number.
• Press the desired memory button M1-M2-M3.
• Put the handset back on the phone.
8.2 Calling a memory number
• Pick up the handset and press the Memory button M1-M2-M3.
• The programmed number will be dialled automatically.
Sologic TS-6650
can also be used as a Pause button while
(10).
Sologic TS-6650
5